Will a smart lock fit my door?
Four checks, none of which needs a tool more specialised than a tape measure. If all four pass, almost any lock on this site will go on your door in about twenty minutes.
Most of the time the answer is yes. Smart locks of the kind we sell are designed around the hardware that is already standard across most of Europe, and the majority of hinged doors take one without modification. But “most of the time” is not good enough when you are about to spend three hundred euros, so here are the four things that actually decide it, in the order worth checking them.
Check one: does the door take a euro profile cylinder?
This is the big one, and you can answer it by looking at your key.
A euro profile cylinder takes a flat key with a narrow blade and a pattern of cuts along one or both edges. The keyhole, seen from outside, looks like a circle with a rectangle hanging below it, a shape often described as a keyhole or a figure of eight. If that is what your door has, you are in the right place: this is the standard across most of continental Europe and in a great many other markets.
If instead your key is long with a simple bit on the end, or the lock is a round cylinder in the middle of the door, or it is a mortice lock with a large keyhole you can see through, then it is a different standard and the locks on this site will not fit directly. A locksmith can often convert the door, but that is a separate job and worth pricing before you buy anything.
Check two: how thick is the door?
Open the door and measure its thickness at the edge. Write the number down.
Most interior and apartment doors come in between 38 and 55 millimetres, and everything we sell covers that range. Thicker doors, reinforced security doors and some composite front doors go beyond it, and then the lock needs a longer spindle or an adjustable one. It is not an obstacle, but it is something to tell us before you order rather than after.
Check three: where is the handle in relation to the keyhole?
The distance from the edge of the door to the centre of the handle spindle is called the backset. The vertical distance between the handle and the keyhole matters too, and that is where locks differ.
A full plate lock like the LONG or the SQUARE covers both the handle and the keyhole on one faceplate, so the spacing between them has to match. A two piece lock like the SPLIT mounts the handle and the keyhole independently, so the spacing does not matter at all.
If your door has an unusual arrangement, the SPLIT is usually the answer.
Check four: what is in the way?
Walk up to the door and look at the area the lock needs to occupy. Things that cause trouble:
- A letter plate sitting exactly where the faceplate wants to go
- A glazing bead or a raised panel edge that stops the plate sitting flat
- A narrow stile on an aluminium or uPVC door, leaving less width than the plate needs
- A decorative moulding that makes the surface uneven
- A door closer arm or a security chain mounted in the same area
None of these is necessarily fatal, but each one changes which model is sensible. A narrow aluminium stile points at the LONG, which is tall and narrow. A letter plate in the wrong place points at the SPLIT. An uneven surface may just need a packing shim.
What about the cylinder I already have?
If you are choosing a lock that mounts over the existing cylinder, the cylinder has to be the correct length for the door already, which is its own measurement. Our guide to measuring a euro cylinder walks through it.
If you would rather skip that entirely, the SLIM C brings its own cylinder and the Smart Cylinder C10 replaces only the cylinder, leaving your handles alone.
Doors we will tell you not to bother with
We would rather lose a sale than process a return, so, plainly: a fully glazed door with no stile, a door with no mortise lock at all, a sliding door, a door where the lock is a surface mounted rim lock, and most garage and roller doors are not suitable for these locks. If that is what you have, tell us anyway and we will say whether anything else would work.
The two minute version
Photograph the edge of the door with the faceplate visible, photograph the door from the outside, and measure the door thickness. Send all three to info@livlock.eu. We will tell you which lock fits, which cylinder length you need, and whether anything about your door makes a particular model a bad idea.
Common questions
How do I know if I have a euro cylinder?
Look at your key. A euro cylinder takes a flat key with a narrow blade and cuts along the edge, and the keyhole looks like a circle with a rectangle below it. That shape is the standard across most of Europe.
My door is thicker than 55 mm. Is that a problem?
Not usually, but it needs a longer or adjustable spindle, so tell us the thickness before ordering rather than after. Reinforced and composite front doors are the usual cases.
There is a letter plate where the lock needs to go. What can I do?
Use a two piece lock. The SPLIT mounts the handle and the keyhole separately, so it only needs two small flat areas rather than one long one.
Will a smart lock fit a uPVC or aluminium door?
Often yes, particularly the LONG, which is tall and narrow and suits a narrow stile. What matters is the backset and the cylinder length, so send a photo of the door edge.
Can I fit one to a glass door?
Almost never. These locks need a mortise lock body inside the door edge, which a fully glazed door does not have. Send us a photo and we will tell you honestly.
More guides
- The TTLock app: guest codes, eKeys and the entry log Every lock we sell runs on the TTLock app. Here is what it can actually do, what each
- Do smart locks work without WiFi? Yes, completely. The lock has no internet connection of its own and does not need one. What a
- Are smart locks secure? The honest answer involves separating two questions that usually get mixed up: whether the door is harder to