The TTLock app: guest codes, eKeys and the entry log

Every lock we sell runs on the TTLock app. Here is what it can actually do, what each type of access is for, and the one setup mistake worth avoiding on day one.

Written by admin_marko, last updated 20 November 2026

The locks on this site run on TTLock, a widely used access control platform with apps for iOS and Android. The hardware is only half of what you are buying: the app is how you add people, take access away, and find out who opened the door while you were out.

This guide is a plain account of what it does. It is not a replacement for the manual that comes with your lock.

The one thing to get right on day one

Pair the lock to your own phone first, before anyone else touches it.

The first account to connect becomes the administrator. Everything else follows from that account: it is the one that can add and remove credentials, issue eKeys, and read the entry log. If a fitter pairs it to their phone to test it and then hands you the box, you do not own your own lock.

If this has already happened, it is recoverable, but it involves resetting the lock and losing whatever was set up. Much easier to get it right first time.

The five kinds of access

Fingerprints

Enrolled at the lock with the app open. There is no practical limit on how many you store, so enrol everyone in the household, including both thumbs for each person, which makes a difference when one hand is full. Each print can be deleted individually.

PIN codes

This is where the app earns its place, because a code is not just a code. You can create:

  • A permanent code, for people who come and go indefinitely
  • A one time code, which works once and then never again, for a delivery or a viewing
  • A timed code, valid only between two dates and times, which is the one short stay hosts live in
  • A recurring code, for example Tuesdays between nine and twelve, for a cleaner

Codes can be generated without being near the lock, which is worth understanding: the lock and the app share a clock and an algorithm, so a code created on your phone in another country will be accepted by a lock that has never heard of it. That is why time limited codes work without an internet connection at the door.

Cards and fobs

Held against the reader to enrol, deleted individually. Good for people who do not want an app and do not want to memorise a number.

eKeys

An eKey is access granted to another person’s TTLock account rather than to a code or a card. You send it to their phone number or email, they accept it in their own app, and from then on their phone opens the door. eKeys can be permanent, timed, one time, or recurring, and can be revoked instantly.

Use an eKey for a family member or a long term tenant. Use a code for a guest, because a code does not require them to install anything.

The mechanical key

Not managed by the app at all, which is exactly why it is the fallback.

The entry log

Every unlock is recorded with the credential used and the time. In practice this answers questions you did not know you had: whether the cleaner came, when the guest actually arrived, whether the teenager got home.

Without a gateway you see the log when your phone next connects to the lock over Bluetooth. With a G2 gateway you see it live and can set notifications for each opening.

Worth saying plainly: this is a record of when identifiable people entered a building, which makes it personal data. Keep it because it is useful, do not keep it forever, and tell people it exists.

What changes with a gateway

Out of the box the lock is Bluetooth only, which covers anyone standing at the door. A gateway bridges it to your WiFi and adds three things: unlocking from anywhere, creating and deleting credentials remotely, and live notifications.

If you are never away from the property, you may not need one. If you let it, you do.

Things people find surprising

The lock has no internet connection of its own. It talks to your phone over Bluetooth, or to a gateway that has WiFi. If your internet goes down, the lock carries on exactly as before: fingerprints, codes, cards and the key all still work. You lose only the remote features.

Deleting a credential is instant and local. A deleted code stops working at the lock, not merely in the app.

Admin rights can be shared. A second person can be given administrator access so that the household does not depend on one phone. Worth doing.

If something is not behaving

In order: check the battery level, stand closer to the lock, close and reopen the app, and then try from a different phone. Most issues are one of those four. If none of them helps, email info@livlock.eu with the model and what you have already tried, and we will work through it with you.

Common questions

Who should pair the lock first?

You, on your own phone, before anyone else touches it. The first account becomes the administrator, and that is the account that can add people, revoke access and read the entry log.

Can I create a code without being near the lock?

Yes. The lock and the app share a clock and an algorithm, so a code generated on your phone anywhere in the world will be accepted by the lock even though the two have never communicated about it.

What is the difference between an eKey and a code?

An eKey grants access to someone's TTLock account, so their phone opens the door and you can revoke it instantly. A code requires them to install nothing. Use eKeys for family, codes for guests.

Does the lock need internet?

No. It works over Bluetooth with your phone. A gateway adds WiFi, which is what lets you unlock and change codes remotely, but if your internet fails the lock carries on working normally.

Can two people both be administrators?

Yes, and it is worth setting up, so the household does not depend on one phone being charged and present.

Still not sure what fits your door?

Send a photo of the door edge and the two cylinder measurements. We will tell you which model works before you order anything.