Smart locks for Airbnb and short stay rentals
What self check-in really involves once the lock is on the door: the codes, the message you send, the handful of things that go wrong, and how hosts avoid them.
The case for a smart lock in a short stay rental is not the technology. It is that you stop arranging your day around other people’s travel plans. No waiting in a flat for a guest whose flight is late, no key safe with a combination that half the street now knows, no cleaner who needs their own set, no replacing a cylinder because somebody flew home with the keys in their pocket.
This guide is about how that works in practice, and about the parts that nobody mentions until they go wrong.
How self check-in actually works
You issue a PIN code that is valid only between two dates and times. The guest types it on the keypad and the door opens. When the booking ends, the code stops working on its own, without you doing anything.
That is the whole mechanism. Everything else is detail.
What you send the guest
Send the code, the door it opens, and a photograph of the door. The photograph matters more than people expect: a guest arriving at eleven at night in an unfamiliar building needs to recognise the door, not just find the street. Include which floor, and whether there is a street door with a separate entry system.
Send it the day before rather than at booking. Codes sent weeks in advance get lost in a thread.
What happens between guests
Nothing, unless you want it to. The previous code has expired. The cleaner has their own permanent code or card, which works all year and is not affected by guest turnover.
The things that actually go wrong
The guest cannot get in and it is one in the morning
This is the scenario that decides whether you need a WiFi gateway. Without one, the lock is a Bluetooth device: to change anything you have to be standing next to it. With a G2 gateway plugged into a socket near the door, you can issue a new code from your phone wherever you are and talk the guest through it in thirty seconds.
If you let a property you are not living in, fit the gateway. It is the difference between a problem and an emergency.
The batteries die mid stay
They will not die without warning. The app shows the level and warns you long before it matters. The discipline that prevents this is simple: change them on a schedule rather than on a notification, twice a year, and keep a spare set in the flat.
If it ever does happen, the mechanical key still opens the door, and several models take a USB power bank as an emergency supply.
The door did not actually close
A lock knows whether it is locked. It does not know whether the door is against the frame. A guest who pulls the door behind them and walks off without checking leaves a flat that looks secured and is not. A door sensor closes that gap and tells you in the app.
The guest shares the code
They will, occasionally, with the friend arriving later. That is usually fine and is one of the advantages over a single physical key. What matters is that the code dies at checkout regardless of how many people have it.
Which lock suits a rental
Three things make a lock good for this specific job.
A keypad a stranger can use. Someone who has never seen your lock, is tired, and is reading a code off a phone screen needs a conventional number pad. The SQUARE has a twelve key grid and is the easiest of our locks to use cold.
An entry log. Knowing that the guest arrived at 23:40 and the cleaner at 09:15 settles most disputes before they start.
A physical key that still works. Keep one, somewhere you can reach, not in the flat.
If the entrance is a shared building door or a gate rather than the flat door itself, you may need a separate keypad mounted where the lock is not.
A word about the law
Access logs record when identifiable people entered a property, which makes them personal data under the GDPR. Keep them because they are useful, but do not keep them forever, do not publish them, and if a guest asks what you hold about them, answer honestly. Mentioning in your listing that the property uses keyless entry with a code that expires is good practice and reassures more guests than it worries.
What we would fit
For a one bedroom flat let by the night, with a normal front door: a SQUARE or a SLIM on the door, a G2 gateway plugged in nearby, a door sensor on the frame, and a spare set of batteries in the kitchen drawer. That is the whole system, it costs less than a season of key handovers, and after the first week you will stop thinking about it.
Common questions
Can I give each guest their own code?
Yes, and you should. Each code is separate and can be set to work only between two dates and times, so it expires at checkout whether or not you remember to remove it.
Do I need the WiFi gateway for a rental?
If you are not living in the property, yes. Without it you cannot change a code unless you are standing at the door, which is the one thing you need at one in the morning when a guest cannot get in.
What if a guest keeps the code and comes back?
They cannot. A time limited code stops working at the end of the booking, which is the main advantage over a key or a key safe combination.
Is a key safe not simpler?
Simpler to install, worse in every other way. The combination rarely changes, anyone who has stayed before still knows it, and you have no record of who opened it or when.
Do I have to tell guests the door has a smart lock?
You do not have to, but say so in the listing anyway. Most guests prefer self check-in, and mentioning that the code expires at checkout reassures more people than it worries.
More guides
- Smart locks for offices and shared entrances Access control for a small team, without a server, a contract or a monthly fee. What changes when
- Will a smart lock fit my door? Four checks, none of which needs a tool more specialised than a tape measure. If all four pass,
- How to measure a euro cylinder Two measurements, taken from the centre screw in the door edge to each face of the door. Get